S3 GPS Land Area Measurement

High Accuracy GPS Land Measuring Vehicle Professional Use GPS Land Meter

Power On,Power Off Of GPS Land Meter:

1. Power on: With the equipment off,hold the "Stop" button until the screen lights up(about 2 sec)and the boot interface appears,then it’s successful to turn on the device.

2. Power off:

① After booting,press the "Stop" button for 2 seconds .

② When the shutdown page appears,press the 【Enter】 button to confirm the shutdown.

Note:① When the instrument is in non-measurable state, if the instrument is not operated, the instrument will automatically shut down after 1 hour.

② When the battery power is lower than 5 %, it will give the prompt and turn off automatically.

Unit Setting Of GPS Land Meter:

① On the home page of boot,press the 【Settings】button to enter the settings interface；

② Press the▲▼button move to“unit setting”；

③ Press the【Enter】button to enter；

④ Press ▲▼ button to choose the unit you want.

⑤ After finishing setting,press the "Stop" button to exit.

Note: After setting, the measurement interface data is displayed as the set unit, and the units displayed in the data records are all set units.

The Unit Price Of GPS Land Meter:

① On the home page of boot,press the 【Settings】button to enter the settings interface；

② Press the▲▼button move to“unit setting”；Press the【Enter】button to enter；

③ Press the【Enter】button to choose the unit price；

④ Press ▲▼ button to adjust the value of number;

⑤After finishing setting,press the "Stop" button to exit.

Note: After the setting of unit price, the amount can be viewed in the data display of the measurement interface, or in the measurement record details interface.

Parameters of S3:

S3 GPS Land Area Measurement

SBAS GPS Land Area Measurement

0.03Mu GPS Land Measuring

S3 GPS Land Area Measurement Images